Description
Details
Manufacturer: Eaton Powerware 9125 Rack/Tower UPS 2000VA
Model: PW9125-2000 Refurbished
Condition: Refurbished with New Batteries
Part Number: PW9125-2000
Warranty: 1 Year Extended Warranty, additional warranty available
The PW9125-2000 is refurbished and comes with fresh new batteries. The PW9125-2000 comes with a one year replacement warranty. Additional warranty of up to 3 years is available for your convenience.
PW9125-2000 Specifications:
Electrical Input |
|
Nominal Voltage |
120 Vac (user-selectable for 100, 110, 120, and 127 Vac |
Voltage Range |
80 - 144V (without using batteries) |
Input Power Factor |
>.95, typical |
Frequency |
50/60 Hz, autosensing |
Frequency Range |
45 - 65 Hz |
Electrical Output |
|
On Utility Voltage Regulation |
+/-3% of nominal |
On Battery Voltage Regulation |
+/-3% of nominal |
Efficiency |
89 - 92%, depending on load |
Frequency Regulation |
+/- 3 Hz online; +/- 0.1 Hz on battery |
Load Crest Factor |
3 to 1 ratio |
Battery |
|
Internal Battery type |
Sealed, lead-acid; maintenance free |
EBM Battery Type |
PW9125 24 EBM: (8) 12V, 9 Ah |
On Battery Runtime |
See Battery Runtimes |
Battery Replacement |
Hot-swappable internal and external batteries |
Recharge Time |
<2 hrs. from complete discharge to 80% capacity at nominal line conditions |
Start-On-Battery |
Allows start of UPS without utility input |
Communications |
|
Serial Port |
RS-232 communications port standard |
Communications Cable |
6-foot communications cable included |
ConnectUPS-M SNMP Module (Optional)2 |
SNMP card adds direct control and monitoring capabilities in SNMP-based networks |
RS-232 Multi-Port Module (Optional)2 |
Equipped with (6) communications ports to provide serial communication to multiple devices |
USB Module (Optional)2 |
Allows UPS to communicate with Windows 98 computers via USB port; factory-installed option only |
General |
|
Topology |
True online, double-conversion |
Diagnostics |
Full system self-test on power up |
UPS Bypass |
Automatic on overload or UPS failure |
Weight |
50 lbs |
Environmental and Safety |
|
Safety Markings |
UL, CSA, and NOM |
EMC Markings |
FCC Class B and VCCI Class II |
Surge Suppression |
IEEE/ANSI C62.41 Category B (formerly 587) |
Audible Noise |
<45 dBA (on utility); <50 dBA (on battery) |
Storage Temperature |
0o to 25o C (32o to 77o F) |
Relative Humidity |
5 to 90%, non-condensing |
REPO Port |
Meets NEC code 645-II intent and UL requirements |
Network Transient Protector |
In and out jack for telephone/modem protection of 10Base-T network cable; UL497A tested |
Additional Info
Additional Info
Manufacturer | Eaton Powerware |
---|---|
Form Factor | Tower |
Waveform in Battery Mode | No |
Input Voltage | No |
Output (VA) | No |
Output Voltage | No |
PDU Total Outlets | No |