Description
Details
Manufacturer: Tripp Lite
Model: Tripp Lite SmartPro UPS 5000VA 4000W, RM, 30A, 208/120V
Condition: New batteries, refurbished UPS
Part Number: SMART5000RT3U
Maximum output: 4000W / 5000VA
Typical backup time at half load: 38 minutes (2000 Watts)
Typical backup time at full load: 16 minutes (4000 Watts)
Warranty: 1 year full replacement warranty
Tripp Lite SmartPro 5000VA 4000W RM 6U 208/120V SMART5000RT3U Manual
SMART5000RT3U - Tripp Lite SmartPro 5000VA Specifications:
Input:
Rated input current (Maximum Load) |
24A max. in factory L6-30P configuration; 27A max. when powered by 50A plug or hardwire input |
||
Nominal Input Voltage(s) Supported |
208V AC |
||
UPS Input Connection Type |
|
||
Input Circuit Breakers |
30A double-pole |
||
UPS Input Cord Length (ft.) |
10 |
||
UPS Input Cord Length (m) |
3.1 |
||
Recommended Electrical Service |
30A 208V |
||
Input Phase |
Single-Phase |
Output:
Output Volt Amp Capacity (VA) |
5000 |
||||||||
Output kVA Capacity (kVA) |
5 |
||||||||
Output Watt Capacity (Watts) |
4000 |
||||||||
Output kW Capacity (kW) |
4 |
||||||||
Output Capacity Details |
Maximum output increases to 4800W when hardwire or user-supplied 50A rated input plug is used |
||||||||
Power Factor |
0.8 |
||||||||
Nominal Voltage Details |
208/208/120V nominal output in battery mode |
||||||||
Frequency Compatibility |
60 Hz |
||||||||
Output Voltage Regulation (Line Mode) |
208 & 208/120V (-10%, +20%) |
||||||||
Output Voltage Regulation (Battery Mode) |
+/- 5% |
||||||||
Load Management Receptacles |
Eight switchable single-outlet 5-15R load banks |
||||||||
Output Circuit Breakers |
15A branch rated (x3) - 2 breakers support 5 5-15R outlets each, one breaker supports 2 5-20R outlets, L6-30R and L14-30R outlets are unbreakered |
||||||||
Output AC Waveform (AC Mode) |
Sine wave |
||||||||
Output AC Waveform (Battery Mode) |
Pure Sine wave |
||||||||
Nominal Output Voltage(s) Supported |
110V; 115V; 208/120V; 208V |
||||||||
Output Receptacles |
|
||||||||
Individually Controllable Load Banks |
Yes |
Battery:
Full Load Runtime (min.) |
16 min. (4000w) |
Half Load Runtime (min.) |
38 min. (2000w) |
Expandable Battery Runtime |
Extended runtime supported via optional external battery packs |
External Battery Pack Compatibility |
BP48V24-2U (limit 1); BP48V60RT-3U (multi-pack compatible); BP48V27-2US (multi-pack compatible) |
DC System Voltage (VDC) |
48 |
Battery Recharge Rate (Included Batteries) |
Less than 4 hours from 10% to 90% (typical, full load discharge) |
Internal UPS Replacement Battery Cartridge |
RBC94-2U |
Battery Replacement Description |
Hot-swappable, user replaceable batteries |
Expandable Runtime |
Yes |
Voltage Regulation:
Voltage Regulation Description |
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 151 to 282 |
Overvoltage Correction |
Input voltages between 240V and 260 are reduced by 12% |
Undervoltage Correction |
Input voltages between 180V and 199 are boosted by 12% |
Severe Undervoltage Correction |
Input voltages between 151V and 179 are boosted by 24% |
User Interface, Alerts & Controls:
Switches |
2 Switches control off/on power status and alarm-cancel/self-test operation |
Alarm Cancel Operation |
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate lowbattery status |
Audible Alarm |
Audible alarm indicates power-failure, overload and low-battery conditions |
LED Indicators |
5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status |
Surge / Noise Suppression:
UPS AC Suppression Joule Rating |
1020 |
UPS AC Suppression Response Time |
Instantaneous |
EMI / RFI AC Noise Suppression |
Yes |
Physical:
Cooling Method |
Fans
|
Included Battery Pack Dimensions |
5.2 x 17.5 x 25
|
Included Battery Pack Weight (kg) |
73.94
|
Included Battery Pack Weight (lbs.) |
163
|
Included Mounting Accessory Description |
Set of two included 4POSTRAILKIT mounting brackets enables installation of UPS and Battery Pack in 4 post racks from 20.5 to 36 inches (521 to 914mm)
|
Installation Form Factors Supported with Included Accessories |
4 post 19 inch rackmount
|
Installation Form Factors Supported |
2 post rackmount ( 2POSTRMKITHD ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2-9USTAND )
|
Minimum Required Rack Depth with |
72
|
Minimum Required Rack Depth with |
28.25
|
Minimum Required Rack Depth |
62
|
Minimum Required Rack Depth |
24.46
|
Optional Mounting Accessory Notes |
Optional 2-9USTAND enables upright tower UPS placement (1 required); 2POSTRMKITHD enables 2-post rackmount installation (2 required); 4POSTRAILKITWM enables installation in 4-post short-depth racks from 14.5 to 23.5 inches (368 to 597mm, requires 2)
|
Primary Form Factor |
Rackmount
|
Primary UPS Depth (mm) |
572
|
Primary UPS Height (mm) |
132 |
Primary UPS Width (mm) |
445 |
Rack Height |
6U |
Shipping Dimensions (hwd / cm) |
62.23 x 60.96 x 86.36 |
Shipping Dimensions (hwd / in.) |
24.50 x 24.00 x 34.00 |
Shipping Weight (kg) |
145.88 |
Shipping Weight (lbs.) |
321.62 |
Unit Dimension Details |
Includes 3U UPS/power module and 3U external battery pack |
UPS Housing Material |
Steel |
UPS Power Module Dimensions (hwd, cm) |
13.21 x 44.45 x 57.15 |
UPS Power Module Dimensions (hwd, in.) |
5.2 x 17.5 x 22.5 |
UPS Power Module Weight (kg) |
42.18 |
UPS Power Module Weight (lbs.) |
93 |
Environmental:
Operating Temperature Range |
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
|
Storage Temperature Range |
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius |
Relative Humidity |
0 to 95%, non-condensing |
Battery Mode BTU / Hr. (Full Load) |
1518 |
AC Mode Efficiency Rating (100% Load) |
94% |
Audible Noise |
45 dBA maximum, front side 1m |
Communications:
Network Management Cards |
|
Network Monitoring Port Description |
Supports detailed monitoring of UPS and site power conditions; 2 USB ports, 1 DB9 serial and 1 DB9 contact closure port (4 total) |
PowerAlert Software |
For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert |
Communications Cable |
USB and DB9 cabling included |
WatchDog Compatibility |
Supports Watchdog application, OS and hard-reboot restart options for remote applications |
Communications Interface |
Contact closure; DB9 Serial; USB |
Additional Info
Additional Info
Manufacturer | Tripp Lite |
---|---|
Form Factor | Rackmount |
Waveform in Battery Mode | Pure Sinewave |
Input Voltage | 208V AC |
Output (VA) | 5000VA |
Output Voltage | 120V AC, 208V AC |
PDU Total Outlets | No |