Description
Details
Manufacturer: Tripp Lite
Model: Tripp Lite SmartPro UPS 750VA 600W, RM, 15A, 120V
Condition: New batteries, refurbished UPS
Part Number: SMART750RM1U
Maximum output: 600W / 750VA
Typical backup time at half load: 13.2 minutes (300 Watts)
Typical backup time at full load: 4.9 minutes (600 Watts)
Warranty: 1 year full replacement warranty
Tripp Lite SmartPro 750VA 600W RM 120V SMART750RM1U Manual
SMART750RM1U - Tripp Lite SmartPro 750VA Specifications:
Input:
Rated input current (Maximum Load) |
7A |
||
Nominal Input Voltage(s) Supported |
120V AC |
||
UPS Input Connection Type |
|
||
Input Circuit Breakers |
15A |
||
Recommended Electrical Service |
15A 120V |
||
Input Phase |
Single-Phase |
||
Input Cord Length (ft.) |
10 |
||
Input Cord Length (m) |
3.05 |
Output:
Output Volt Amp Capacity (VA) |
750 |
||
Output Watt Capacity (Watts) |
600 |
||
Power Factor |
0.8 |
||
Nominal Voltage Details |
120v nominal output in battery mode |
||
Frequency Compatibility |
60 Hz |
||
Output Voltage Regulation (Line Mode) |
-21%, +8% |
||
Output Voltage Regulation (Battery Mode) |
+/- 5% |
||
Load Management Receptacles |
Two switchable single-outlet 5-15R load banks |
||
Output AC Waveform (AC Mode) |
Sine wave |
||
Output AC Waveform (Battery Mode) |
Pure Sine wave |
||
Nominal Output Voltage(s) Supported |
110V; 115V; 120V |
||
Output Receptacles |
|
||
Individually Controllable Load Banks |
Yes |
Battery:
Full Load Runtime (min.) |
4.9 min. (600W) |
Half Load Runtime (min.) |
13.2 min. (300w) |
DC System Voltage (VDC) |
24 |
Battery Recharge Rate (Included Batteries) |
Less than 4 hours from 10% to 90% (typical, full load discharge) |
Internal UPS Replacement Battery Cartridge |
RBC64-1U |
Battery Access |
Front panel battery access door |
Battery Replacement Description |
Hot-swappable, user replaceable batteries |
Expandable Runtime |
No |
Voltage Regulation:
Voltage Regulation Description |
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 147 |
Overvoltage Correction |
Input voltages between 128 and 147 are reduced by 12% |
Undervoltage Correction |
Input voltages between 83 and 107 are boosted by 14% |
User Interface, Alerts & Controls:
Switches |
2 Switches control off/on power status and alarm-cancel/self-test operation |
Alarm Cancel Operation |
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate lowbattery status |
Audible Alarm |
Audible alarm indicates power-failure, overload and low-battery conditions |
LED Indicators |
5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status |
Surge / Noise Suppression:
UPS AC Suppression Joule Rating |
450 |
UPS AC Suppression Response Time |
Instantaneous |
EMI / RFI AC Noise Suppression |
Yes |
Physical:
Cooling Method |
Fan
|
Included Mounting Accessory Description |
Included mounting brackets provide front-rail installation in 2 or 4 post racks; For additional stability in 4 post racks, consider optional 4 post mounting accessories 4POSTRAILKIT1U & 4POSTRAILKITWM
|
Installation Form Factors Supported with Included Accessories |
2 post 19 inch rackmount; 4 post 19 inch rackmount
|
Installation Form Factors Supported with Optional Accessories |
4 post rackmount full-depth ( 4POSTRAILKIT1U ); 4 post rackmount shortdepth ( 4POSTRAILKITWM )
|
Minimum Required Rack Depth (cm) |
50.16
|
Minimum Required Rack Depth (inches) |
19.75
|
Optional Mounting Accessory Notes |
Optional 4POSTRAILKITWM enables installation in 4-port shortdepth racks from 14.5 to 23.5 inches (368 to 597mm); Optional 4POSTRAILKIT1U enables installation in 4-post full-depth racks from 20.5 to 36 inches (521 to 914mm
|
Primary Form Factor |
Rackmount
|
Primary UPS Depth (mm) |
425
|
Primary UPS Height (mm) |
44 |
Primary UPS Width (mm) |
445 |
Rack Height |
1U |
Shipping Dimensions (hwd / cm) |
13.21 x 58.67 x 52.58 |
Shipping Dimensions (hwd / in.) |
5.20 x 23.10 x 20.70 |
Shipping Weight (kg) |
15.47 |
Shipping Weight (lbs.) |
34.10 |
UPS Housing Material |
Steel |
UPS Power Module Dimensions (hwd, cm) |
4.44 x 44.45 x 42.54 |
UPS Power Module Dimensions (hwd, in.) |
1.75 x 17.5 x 16.75 |
UPS Power Module Weight (kg) |
13.61 |
UPS Power Module Weight (lbs.) |
30 |
Environmental:
Operating Temperature Range |
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
|
Storage Temperature Range |
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius |
Relative Humidity |
0 to 95%, non-condensing |
AC Mode BTU / Hr. (Full Load) |
38 |
Battery Mode BTU / Hr. (Full Load) |
545 |
AC Mode Efficiency Rating (100% Load) |
98% |
Audible Noise |
45 dBA maximum, front side 1m |
Communications:
Network Management Cards |
|
Network Monitoring Port Description |
Supports detailed monitoring of UPS and site power conditions |
PowerAlert Software |
|
Communications Cable |
USB and DB9 cabling included |
WatchDog Compatibility |
Supports Watchdog application, OS and hard-reboot restart options for remote applications |
Communications Interface |
DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface; USB |
Additional Info
Additional Info
Manufacturer | Tripp Lite |
---|---|
Form Factor | Rackmount |
Waveform in Battery Mode | Pure Sinewave |
Input Voltage | 120V AC |
Output (VA) | 750VA |
Output Voltage | 120V AC |
PDU Total Outlets | No |