Call toll free: 1-866-311-1945 | sales@excessups.com
Your Region:

Tripp Lite SmartPro 500VA RM 1U SMART500RT1U - Refurbished

Refurbished Tripp Lite Smart-Pro UPS 500VA SMART500RT1U
Model: SMART500RT1U
Input: NEMA 5-15P - 120V - 15A 
Output: (6) NEMA 5-15R (Battery Protected), (1) NEMA 5-15R (Surge Only)
Line-Interactive UPS, Sine wave output
New batteries, refurbished UPS
1 Year Warranty Included

* Required Fields

$99.99
Availability: In stock

Description

Details

Manufacturer: Tripp Lite
Model:
Refurbished Tripp Lite Smart-Pro UPS
500VA 120V with New Batteries
Condition:
New batteries, refurbished UPS
Part Number:
SMART500RT1U

Maximum output: 500VA / 300W
Typical backup time
at half load: 14.6 minutes (150 Watts)
Typical backup time
at full load: 3.2 minutes (300 Watts)
Warranty: 1 year full replacement warranty


Tripp Lite Smart-Pro UPS 500VA SMART500RT1U Manual


SMART500RT1U - Tripp Lite Smart-Pro UPS 500VA Specifications:

Output:

 

Output Volt Amp Capacity (VA)

500

Output Watt Capacity (Watts)

300

Nominal Output Voltage(s) Supported

110V; 115V; 120V

Nominal Voltage Details

120v nominal output in battery mode

Frequency Compatibility

60 Hz

Output Voltage Regulation (Line Mode)

-15%, +13%

Output Voltage Regulation (Battery Mode)

+/- 5%

Output Receptacles

(6) 5-15R

UPS Output Receptacles (Surge Suppression Only)

6 UPS outlets, 1 surge-only outlet

Load Management Receptacles

One switchable single-outlet 5-15R load bank

Output AC Waveform (AC Mode)

Sine wave

Output AC Waveform (Battery Mode)

PWM sine wave

INPUT

Rated input current (Maximum Load)

12A (Maximum input with 300W UPS and 1140W surge-only loads)

Nominal Input Voltage(s) Supported

120V AC

UPS Input Connection Type

5-15P

Input Circuit Breakers

15A

UPS Input Cord Length (ft.)

10

UPS Input Cord Length (m)

3.0

Recommended Electrical Service

15A 120V

Input Phase

Single-Phase

BATTERY

Full Load Runtime (min.)

3.2 min. (300w)

Half Load Runtime (min.)

14.6 min. (150w)

DC System Voltage (VDC)

12

Battery Recharge Rate (Included Batteries)

Less than 16 hours from 10% to 90% (typical, full load discharge)

Internal UPS Replacement Battery Cartridge

RBC62-1U

Battery Access

Battery access door

Battery Replacement Description

Hot-swappable, user replaceable batteries

Expandable Runtime

No

VOLTAGE REGULATION

Voltage Regulation Description

Automatic voltage regulation (AVR) maintains line power operation with input voltage as low as 90

Undervoltage Correction

Input voltages between 90 and 105 are boosted by 14%

USER INTERFACE, ALERTS & CONTROLS

Switches

2 Switches control off/on power status and alarm-cancel/self-test operation

Alarm Cancel Operation

Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status

Audible Alarm

Audible alarm indicates power-failure, overload and low-battery conditions

LED Indicators

5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status

SURGE / NOISE SUPPRESSION

EMI / RFI AC Noise Suppression

Yes

AC Suppression Joule Rating

567

AC Suppression Response Time

Instantaneous

PHYSICAL

Included Mounting Accessory Description

Included mounting flanges support rackmount installation in 2 or 4 post racks

Primary Form Factor

Rackmount

UPS Power Module Dimensions (hwd, cm)

4.39 x 43.99 x 28.60

Rack Height (U Spaces)

1

Minimum Required Rack Depth (cm)

36.32

UPS Power Module Weight (kg)

7.98

UPS Shipping Dimensions (hwd / cm)

12.70 x 57.15 x 40.64

Shipping Weight (kg)

9.49

UPS Housing Material

Steel

Minimum Required Rack Depth (mm)

363

Primary UPS Height (mm)

44

Primary UPS Width (mm)

440

Primary UPS Depth (mm)

286

Shipping Height (mm)

127

Shipping Width (mm)

572

Shipping Depth (mm)

406

ENVIRONMENTAL

Operating Temperature Range

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius

Storage Temperature Range

+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius

Relative Humidity

0 to 95%, non-condensing

AC Mode BTU / Hr. (Full Load)

44

Battery Mode BTU / Hr. (Full Load)

360

AC Mode Efficiency Rating (100% Load)

94%

COMMUNICATIONS

Communications Interface

USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface

Network Management Cards

Supports SNMPWEBCARD; TLNETCARD; WEBCARDLX (NOT INCLUDED)

Network Monitoring Port Description

Supports detailed monitoring of UPS and site power conditions

PowerAlert Software

For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert

Communications Cable

USB and DB9 cabling NOT INCLUDED

WatchDog Compatibility

Supports Watchdog application, OS and hard-reboot restart options for remote applications

Network UPS Tools Compatibility

NUT compatible. See full list of compatible Tripp Lite products at http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite

LINE / BATTERY TRANSFER

Transfer Time

4-7 milliseconds

Low Voltage Transfer to Battery Power (Setpoint)

90

High Voltage Transfer to Battery Power (Setpoint)

140

SPECIAL FEATURES

Grounding Lug

Back panel grounding lug

Cold Start (Startup in Battery Mode During a Power Failure)

Cold-start operation supported

High Availability UPS Features

Hot swappable batteries

CERTIFICATIONS

UPS Certifications

Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico)


 



Additional Info

Additional Info

Manufacturer Tripp Lite
Form Factor Rackmount
Waveform in Battery Mode Pure Sinewave
Input Voltage 120V AC
Output (VA) 500VA
Output Voltage 120V AC
PDU Total Outlets N/A

Related Products