Call toll free: 1-866-311-1945 |
Your Region:

Refurbished Tripp Lite SmartPro 1500VA 120V SMART1500RM2U Zoom


Tripp Lite SmartPro UPS 1500VA 120V SMART1500RM2U - Refurbished

Refurbished Tripp Lite SmartPro UPS 1500VA SMART1500RM2U
Model: SMART1500RM2U
Input: NEMA 5-15P
Output: (8) NEMA 5-15R
Line-Interactive UPS - Sine wave Output
New batteries, refurbished UPS
1 Year Warranty Included

Msrp Price: $549.99


Availability: Sold Out



Manufacturer: Tripp Lite
Model: Refurbished Tripp Lite SmartPro UPS
1500VA 120V with New Batteries
Condition: New batteries, refurbished UPS
Part Number: SMART1500RM2U
Maximum output: 1350W / 1500VA
Typical backup time
at half load: 13.0 minutes (675 Watts)
Typical backup time
at full load: 4.5 minutes (1350 Watts)
1 year full replacement warranty

Tripp Lite SmartPro UPS 1500VA SMART1500RM2U Manual

SMART1500RM2U - Tripp Lite SmartPro UPS 1500VA Specifications:


Output Volt Amp Capacity (VA) 1500
Output kVA Capacity (kVA) 1.5
Output Watt Capacity (Watts) 1350
Output kW Capacity (kW) 1.35
Power Factor 0.9
Nominal Output Voltage(s) Supported 110V; 115V; 120V
Nominal Voltage Details 120v nominal output in battery mode
Frequency Compatibility 60 Hz
Output Voltage Regulation (Line Mode) -21%, +8%
Output Voltage Regulation (Battery Mode) +/- 5%
Output Receptacles (8) 5-15R
Load Management Receptacles Two switchable two-outlet 5-15R load banks
Output AC Waveform (AC Mode) Sine wave
Output AC Waveform (Battery Mode) Pure Sine wave


Rated input current (Maximum Load) 12A
Nominal Input Voltage(s) Supported 120V AC
UPS Input Connection Type 5-15P
Input Circuit Breakers 15A
UPS Input Cord Length (ft.) 10
UPS Input Cord Length (m) 3.0
Recommended Electrical Service 15A 120V
Input Phase Single-Phase


Full Load Runtime (min.) 4.5 min. (1350w)
Half Load Runtime (min.) 13 min. (675w)
DC System Voltage (VDC) 36
Battery Recharge Rate (Included Batteries) Less than 4.5 hours from 10% to 90% (typical, full load discharge)
Internal UPS Replacement Battery Cartridge RBC93-2U
Battery Access Front panel battery access door
Battery Replacement Description Hot-swappable, user replaceable batteries
Expandable Runtime No


Voltage Regulation Description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 147
Overvoltage Correction Input voltages between 128 and 147 are reduced by 12%
Undervoltage Correction Input voltages between 83 and 107 are boosted by 14%


Front Panel LED Display Front panel LED information offers UPS and site power status and operating data
Switches 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions
Alarm Cancel Operation Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available
Audible Alarm Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions


UPS AC Suppression Joule Rating 570
UPS AC Suppression Response Time Instantaneous
EMI / RFI AC Noise Suppression Yes


Included Mounting Accessory Description N/A
Installation Form Factors Supported with Optional Accessories 2 post rackmount(2POSTRMKITWM); Wallmount(2POSTRMKITWM); Tower(2-9USTAND)
Primary Form Factor Rackmount
UPS Power Module Dimensions (hwd, cm) 8.76 x 43.94 x 34.16
Rack Height (U Spaces) 2
Minimum Required Rack Depth (cm) 41.91
UPS Power Module Weight (kg) 21.09
UPS Shipping Dimensions (hwd / cm) 21.59 x 59.44 x 50.55
Shipping Weight (kg) 26.2
Cooling Method Fan
UPS Housing Material Steel
Minimum Required Rack Depth (mm) 419
Primary UPS Height (mm) 88
Primary UPS Width (mm) 439
Primary UPS Depth (mm) 342
Shipping Height (mm) 216
Shipping Width (mm) 594
Shipping Depth (mm) 505


Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity 0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load) 267
AC Mode Efficiency Rating (100% Load) 95%


Communications Interface USB, DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface
Network Monitoring Port Description Supports detailed monitoring of UPS and site power conditions
PowerAlert Software Included
Communications Cable USB and DB9 (NO CABLES INCLUDED)
WatchDog Compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications
Network UPS Tools Compatibility NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at Lite

Additional Info

Additional Info

Manufacturer Tripp Lite
Form Factor Rackmount
Waveform in Battery Mode No
Input Voltage No
Output (VA) No
Output Voltage No
PDU Total Outlets N/A

Related Products