Tripp Lite Smart-Online UPS 5000VA 4500W RM 4U 208V/240V SU5000RT4UHV - Refurbished

Rated input current (Maximum Load)

24A (200V), 24A (208V), 23.6A (220V), 23A (230V), 21.7A (240V)

Nominal Input Voltage(s) Supported

200V AC; 208V AC; 240V AC

Nominal Input Voltage Description

Factory configured to 208V

UPS Input Connection Type

UPS Input Cord Length (ft.)

10

UPS Input Cord Length (m)

3.1

Recommended Electrical Service

30A

Input Phase

Single-Phase

Output Volt Amp Capacity (VA)

5000

Output kVA Capacity (kVA)

5

Output Watt Capacity (Watts)

4500

Output kW Capacity (kW)

4.5

Power Factor

0.9

Crest Factor

3:1

Nominal Voltage Details

208V default

Frequency Compatibility

50 / 60 Hz; Supports 50 to 60 Hz and 60 to 50 Hz conversion

Frequency Compatibility Details 

Output frequency matches input nominal on startup; Frequency conversion mode enables conversion of 60Hz to
50Hz or 50Hz to 60Hz (no de-rating)

Output Voltage Regulation (Line Mode)

+/- 2%

Output Voltage Regulation (Economy Line Mode)

+/- 10%

Output Voltage Regulation (Battery Mode)

+/- 2%

Output Circuit Breakers

20A breaker protects L6-20R outlets, L6-30R outlets are unbreakered

Output AC Waveform (AC Mode)

Pure Sine wave

Output AC Waveform (Battery Mode)

Pure Sine wave

Output Capacity Details 

Supports up to 105% load continuously in double conversion mode, 106 to 125% for 1 minute, 126% to 150% for 30 seconds; Loads over 150% trigger immediate bypass mode operation to support loads directly from mains power; Double conversion mode is automatically restored as the overload is cleared

Nominal Output Voltage(s) Supported

200V; 208V; 240V

Output Receptacles

Individually Controllable Load Banks

No

Full Load Runtime (min.)

3.5 minutes (4500 watts)

Half Load Runtime (min.)

11 minutes (2250 watts)

Expandable Battery Runtime

Supports extended runtime with optional external battery packs

External Battery Pack Compatibility

BP192V1037C-1PH;  BP192V12-3U ; BP192V1407C-1PH; BP192V557C-1PH;  BP192V787C-1PH ;  BP192V5RT2U  (limit 1)

DC System Voltage (VDC)

192

Battery Recharge Rate (Included Batteries) 

6 hours from 10% to 90% (typical, full load discharge)

Internal UPS Replacement Battery
Cartridge

RBC5-192  (qty 1)

Battery Access

Front panel battery access

Battery Replacement Description

Hot-swappable, user replaceable batteries

Expandable Runtime

Yes

Voltage Regulation Description

Online, double-conversion power conditioning

Overvoltage Correction

2% output voltage regulation during overvoltages to 280V (full load) / 300V (90% load or less)

Undervoltage Correction

2% output voltage regulation during undervoltages to 156V (full load) / 100V (50% load or less)

Front Panel LCD Display

Selectable LCD display with scroll and selection buttons enables UPS control and detailed monitoring options; LED/LCD panel rotates for viewing in rack/tower formats (see manual)

Switches

2 Switches control off/on power status and alarm-cancel/self-test operation; 2 additional switches support set and execute scrolling LCD functions.

Alarm Cancel Operation

Alarm cancel switch

Audible Alarm

Unique audible alarms for all major UPS, environmental and power conditions (see manual)

LED Indicators

6 LEDs indicate line power, online mode, economy/bypass mode, on-battery, charger and AC output status; LCD screen offers additional information and control options

UPS AC Suppression Joule Rating

2595

UPS AC Suppression Response Time

Instantaneous

EMI / RFI AC Noise Suppression

Yes

Cooling Method

Included Mounting Accessory Description

4 post rackmount installation accessories included

Minimum Required Rack Depth with External Battery Pack (cm)

73

Minimum Required Rack Depth with
External Battery Pack (in.)

28.67

Minimum Required Rack Depth
without External Battery Pack (cm)

65

Minimum Required Rack Depth
without External Battery Pack (in.)

25.67

Minimum Required Rack Depth (cm)

95.25 

Minimum Required Rack Depth (inches)

37.5

Optional Mounting Accessory Notes

2 sets of  2POSTRMKITHD  required for 2 post rackmount installation of separate power module and battery pack

Primary Form Factor

Rackmount

Primary UPS Depth (mm)

525

Primary UPS Height (mm)

174

Primary UPS Width (mm)

445

Rack Height

4U

Shipping Dimensions (hwd / cm)

30.48 x 60.96 x 73.66

Shipping Dimensions (hwd / in.)

12.00 x 24.00 x 29.00 

Shipping Weight (kg)

68.95

Shipping Weight (lbs.)

152.00

UPS Housing Material

Steel

UPS Power Module Dimensions (hwd, cm)

17.40 x 44.45 x 52.50

UPS Power Module Dimensions (hwd, in.)

6.85 x 17.5 x 20.67

UPS Power Module Weight (kg)

51.53

UPS Power Module Weight (lbs.)

113.6 

Operating Temperature Range

Storage Temperature Range

+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius

Relative Humidity

5% to 90% (non-condensing)

AC Mode BTU / Hr. (Full Load)

1767

AC Economy Mode BTU / Hr. (Full Load) 

640

Battery Mode BTU / Hr. (Full Load)

1708

AC Mode Efficiency Rating (100% Load)

90%

AC Economy Mode Efficiency Rating (100% Load)

96%

Operating Elevation (ft.)

0 to 6560 ft. / 0 to 2000 m

Audible Noise

65 dB at 1m front side

Operating Elevation (m)

0-2000 m

Network Management Cards

SNMPWEBCARD ;  TLNETCARD ;  WEBCARDLX ;  MODBUSCARD ;  RELAYIOCARD

Network Monitoring Port Description

Two contact closure monitoring options available - RELAYIOCARD with six configurable contact closure outputs (uses UPS card slot) and RELAYIOMINI with 3 configurable contact closure outputs (requires removal of USB port module)

PowerAlert Software

For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert

Communications Cable

USB, DB9 serial and EPO cables included

WatchDog Compatibility

Yes

Communications Interface

DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface; USB (HID enabled