Tripp Lite PDUMH30HVATNET 5800W Automatic Transfer Switch PDU 30A 200-240V -Refurbished

PDU Type

Auto-Transfer Switch; Switched

Input Phase

Single-Phase

PDU Input Voltage

200; 208; 220; 230; 240

Recommended Electrical Service

Two single-phase 30A 200-240V circuits

Maximum Input Amps

24

Maximum Input Amps Details

Agency rated to 24A continuous

PDU Plug Type

Input Cord Details

Set of two inputs connect to separate PRIMARY and SECONDARY power sources

Input Cord Length (ft.)

10

Input Cord Length (m)

3.05

Output Capacity Details

5.8kW (240V), 5.5kW (230V), 5.3kW (220V), 5kW (208V), 4.8kW (200V) total capacity / 30A max (Agency de-rated to 24A); 24A max per L6-30R outlet; 16A max per breakered outlet bank; 16A max per C19 outlet; 12A max per C13
outlet

Frequency Compatibility

50 / 60 Hz

Output Receptacles

Output Nominal Voltage

200-240V

Overload Protection

Includes two 20A output circuit breakers; Breaker 1 controls the upper row of 9 outlets (8 C13, 1 C19); Breaker 2 controls the lower row of outlets (8 C13, 1 C19); L6-30R outlet is unbreakered

Customized Load Management
Receptacles

Each outlet is individually controllable via remote interface

Front Panel LCD Display

Digital display reports output amps in 4 separately metered loading segments (BANK 1: Outlets #1-9; BANK 2:
Outlets #10-18; BANK 3: Outlet #19), whole-PDU output kW load level and input voltage on primary and secondary input lines

Front Panel LEDs

19 LEDs display power on/off status for each outlet, plus 2 LEDs for power status on Primary and Secondary input
connection and three additional LEDs to label the displayed numeric value as Amps, kW or Voltage. Network Link/Activity (Green): Flashes for network activity. Network Speed (Yellow): 10 Mbps (Flashing), 100 Mbps (On steady). LX Platform Interface Status: Normal Operation (Solid Green); Software Update (Alternating Green/Orange
~1/sec); Factory Reset (Alternating Green/Orange ~2/sec).

Switches

ENTER and MODE switches toggle the digital display to show output amps (Banks 1-4), total kW output and input voltage (primary, secondary). LX Platform Interface: Recessed reset switch for interface reboot and factory reset.

Automatic Shut-Off

No

Material of Construction

Metal

Form Factors Supported

2U rackmount

Minimum Required Rack Depth (cm)

40.64

Minimum Required Rack Depth
(inches)

16

PDU Form Factor

Horizontal (2U)

Unit Dimensions (hwd / in.)

3.500 x 17.500 x 12.500

Unit Dimensions (hwd / cm)

8.8 x 44.5 x 31.8

Unit Weight (lbs.)

13.70

Unit Weight (kg)

6.21

Operating Temperature Range

32° to 104°F (0° to 40°C)

Storage Temperature Range

-22° to 122°F (-30° to 50°C)

Relative Humidity

5% to 95% non-condensing

Operating Elevation (ft.)

0-10,000

Operating Elevation (m)

0-3000

PowerAlert Software

LX Platform Interface: PowerAlert Device Manager

Communications Cable

Micro-USB- to-USB A configuration/console Access cable

Network Monitoring Port

RJ45 Network port, Micro-USB Configuration port, USB A port supports a variety of Envirosense2 environmental and
control modules. See Accessories>Management Hardware section for more information about these modules.

SNMP Compatibility

Pre-installed LX platform interface provides remote monitoring via Java-free HTML5 web interface, telnet, SSH and
SNMP management systemsPre-installed LX platform interface provides remote monitoring via Java-free HTML5
web interface, telnet, SSH and SNMP management systems

Network Compatibility

10 Mbps; 100 Mbps (Fast Ethernet)

Communications Interface

Pre-installed network card; USB

High Availability PDU Features

Auto Probe Monitoring and Reboot (included); Auto-Transfer Switching; Auto Load Shedding

Product Certifications

NOM (Mexico); UL 60950-1

Product Compliance

RoHS; FCC Part 15 Class A (USA); Trade Agreements Act (TAA)