APC SMART-UPS RT 2200VA RM 120V Network Card AP9631 Pre-install
Model: SURTA2200RMXL2U-NC
Input: NEMA 5-20P (120V - 20A)
Output: (6) NEMA 5-15R (Battery Backup)
Double Conversion Online UPS - Sinewave Output
New batteries, Refurbished UPS
1 Year Warranty Included
In stock
Manufacturer:Â APC
Model:Â APC SMART-UPS RT 2200VA RM 120V Network Card
Condition: New Batteries, Refurbished UPS
Part Number:Â SURTA2200RMXL2U-NC
Maximum output: 1600W / 2200VA
Typical backup time at half load: 16.52 minutes (800 Watts)
Typical backup time at full load: 5.54 minutes (1600 Watts)
Output Waveform:Â Sine wave
Warranty:Â 1 Year Full Replacement Warranty
Â
APC SMART UPS RT 2200VA RM 120V Network Card - SURTA2200RMXL2U-NC - User's Manual
Â
SURTA2200RMXL2U-NC Specifications:
Main:
|
Main Input Voltage |
120V |
||
|
Main Output Voltage |
120V |
||
|
Rated Power in W |
1600W |
||
|
Rated Power in VA |
2200VA |
||
|
Input Connection Type |
|
||
|
Output Connection Type |
|
||
|
Number of Rack Unit |
2U |
||
|
Cable Length |
6 ft (1.83 m) |
||
|
Number of Cables |
1 |
||
|
Battery Type |
Lead-Acid Battery |
General:
|
Number of Power Module Free Slots |
0 |
|
Number of Power Module Filled Slots |
0 |
|
Redundant |
No |
Batteries & Runtime:
|
Number of Battery Filled Slots |
0 |
|
Battery Recharge Time |
3 h |
|
Number of Battery Replacement Quantity |
1 |
|
Battery Charge Power (Watts) |
144 W rated |
|
Battery Charge Power (Watts) |
151 W rated |
|
Battery Power in VAH |
432 VAh runtime |
|
Battery Life |
3 - 5 year(s) |
|
Replacement Battery |
RBC57 |
|
Battery Option |
SURTA48RMXLBP2U 1 864 VAh |
|
Extendable Run Time |
1 |
Input:
|
Network Frequency |
50/60 Hz +/- 5 Hz auto-sensing |
|
Input Voltage Limits |
90 - 150V |
Output:
|
Maximum Configurable Power in W |
1600W |
|
Harmonic Distortion |
Less than 3% |
|
Output Frequency |
50/60 Hz +/- 3 Hz user adjustable +/- 0.1 Hz sync to mains |
|
Crest factor |
3 : 1 |
|
Topology |
Double Conversion Online |
|
Waveform Type |
Sine wave |
|
Bypass Type |
Built-in Bypass |
|
Maximum Configurable Power in VA |
2200VA |
Communications & Management:
|
Interface Port(s) |
DB-9 RS-232 , RJ-45 10/100 Base-T , Smart-Slot , USB |
|
Pre-Installed SmartSlotâ„¢ Cards |
AP9631 |
|
Control panel |
LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : Overload and Bypass Indicators |
|
Audible Alarm |
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
|
Emergency Power Off (EPO) |
Yes |
|
Available SmartSlotâ„¢ Interface Quantity |
1 |
Surge Protection and Filtering:
|
Surge energy rating |
540 Joules |
|
Filtering |
Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Physical:
|
Color |
Black |
|
Height |
3.35 inches (85mm, 8.5cm) |
|
Width |
17.0 inches (432mm, 43.2cm) |
|
Depth |
22.0 inches (559mm, 55.9cm) |
|
Net Weight |
60.5 lbs. (27.5kg) |
|
Mounting Location |
Front |
|
Mounting Preference |
Lower |
|
Mounting Mode |
Rack-mounted |
|
Two Post Mountable |
0 |
|
USB Compatible |
Yes |
Environmental:
|
Ambient Air Temperature for Operation |
32 - 104 °F (0 - 40 °C) |
|
Relative Humidity |
0Â - 95 % non-condensing |
|
Operating Altitude |
0Â - 10000 ft |
|
Ambient Air Temperature for Storage |
-4 - 122°F (-20 - 50°C) |
|
Storage Relative Humidity |
0Â - 95% non-condensing |
|
Storage Altitude |
0Â - 50000 ft (0.00Â - 15240.00 m) |
|
Acoustic Level |
45 dBA
|
|
Heat Dissipation |
587 Btu/h |
|
IP degree of protection |
IP20 |
Â
Â