Main image Click to view image in fullscreen PW5130L2500-XL2U Eaton Powerware 5130 Rack/Tower UPS

Eaton Powerware 5130 Rack/Tower UPS 2500VA PW5130L2500-XL2U

Eaton Powerware 5130 Rack/Tower UPS 2500VA
Model: PW5130L2500-XL2U
Refurbished with New Batteries
1 Year Extended Warranty Included

Additional Warranty

1 Year Included

2 Year + $130.00

3 Year + $227.50

In stock

Quantity

Manufacturer: Powerware 5130 Rack/Tower UPS 2500VA
Model: PW5130L2500-XL2U
Condition: Refurbished with New Batteries
Part Number: PW5130L2500-XL2U
Warranty: 1 Year Extended Warranty, additional warranty available

The PW5130L2500-XL2U comes refurbished with new batteries. The Eaton UPS comes with a one year replacement warranty. Additional warranty of up to 3 years is available for your convenience.

PW5130L2500-XL2U Specifications:

General
LEDs	13 status-indicating LEDs
Topology	Line interactive
Diagnostics	Full system self-test at power up
Transfer Time	1–4 ms typical
ROO/RPO	Rear deck emergency stop connector (for remote on/off and power off)
Rail Kit/Tower Stand	Included with all units
Electrical Input
Nominal Voltage	120V
Voltage Range	120V: 89–151 Vac
Frequency	50/60 Hz
Frequency Range	47–70 Hz for 50 Hz operation 56.5–70 Hz for 60 Hz operation
Power Draw of UPS (full load)	2500: 20.8A @120V, 10.9A @230V
Electrical Output
Power Factor	0.9
On Utility Voltage Regulation	120V: 102–132 Vac 230V: 184–265 Vac
On Battery Voltage Regulation	-10%, +6% of nominal
Efficiency	Normal or line mode: >94% On battery: 70% (1250–1750 VA), 75% (2500–3000 VA)
Frequency Regulation	0.1 Hz
Over Current Protection	Electronic current limit
Load Crest Factor	3:1
Load Segments	Two individually controlled output receptacles
Battery
Internal Battery Type	1250/2500 VA: 12V/7.2 Ah; sealed, lead-acid; maintenance free 1750/3000 VA: 12V/9 Ah; sealed, lead-acid; maintenance free
EBM Battery Type	12V/9 Ah
Battery Runtime	1250 VA: 5 min w/internal batteries @100% load (0.9 PF) 1750 VA: 3.5 min w/internal batteries @100% load (0.9 PF) 2500–3000 VA: 3 min w/internal batteries @100% load (0.9 PF)
Battery Replacement	Hot-swappable internal batteries
Start-On-Battery	Allows start of UPS without utility input
Communications
Serial Port	RS-232 (RJ45) ports
USB Port	As standard (HID)
Optional Communications Slots	ConnectUPS-MS network management card and ModBus
Cables	RS-232 and USB 6-foot communications cables included
Power Management Software	Eaton Software Suite CD-ROM (bundled with UPS)
Environmental
Safety Markings	120V: UL; cUL 230V: C-Tick; CE, TUV, cUL, UL
Safety Conformance	120V: UL 1778; UL497A; cUL (CAN/CSA C22.2, No. 107.1) 230V: UL1778, UL 497A (data line only); cUL (CAN/CSA C22.2, No. 107.1); EN 50091-1-1 and IEC 60950
EMC Compliance	120V: FCC Part 15 subpart B Class A 230V: EN 50091-2. FCC Part 15 subpart J Class A
Operating Temperature	1250 VA: 0˚C (32˚F) to +40˚C (104˚F) 1750–3000 VA: 0˚C (32˚F) to +35°C (95˚F)
Storage Temperature	-15˚C (5˚F) to +50˚C (122˚F)
Relative Humidity	20–95% non-condensing
Surge Suppression	ANSI C62.41 Category A (formerly IEEE 587)
Audible Noise	Max 45 dBA
Altitude	Up to 10,000 ft (3000M) without de-rating