Loading...
Main image
Click to view image in fullscreen
![]()
Tripp Lite SmartOnline 1000VA 900W Double Conversion UPS 120V SU1000RTXLCD2U - Refurbished
Tripp Lite SmartOnline 1000VA 900W RM 2U
Model: SU1000RTXLCD2U
Input: NEMA 5-15P (120V - 15A)
Output: (6) NEMA 5-15R
Online Double Conversion UPS - Sine wave Output
New batteries, Refurbished UPS
1 Year Warranty Included
$349.99
Back Order
Manufacturer: Tripp Lite
Model: Tripp Lite SmartOnline UPS 1000VA 900W, RM, 2U, 120V
Condition: New batteries, refurbished UPS
Part Number: SU1000RTXLCD2U
Maximum output: 900W / 1000VA
Typical backup time at half load:14 minutes (450 Watts)
Typical backup time at full load: 4.8 minutes (900 Watts)
Warranty: 1 year full replacement warranty
Tripp Lite SmartOnline 1000VA 900W RM 120V SU1000RTXLCD2U Manual
SU1000RTXLCD2U - Tripp Lite SmartOnline 1000VA Specifications:
Input:
|
Rated input current (Maximum Load) |
8.6A |
||
|
Nominal Input Voltage(s) Supported |
100V AC; 110V AC; 115V AC; 120V AC; 127V AC |
||
|
Nominal Input Voltage Description |
120V factory default |
||
|
UPS Input Connection Type |
|
||
|
Input Circuit Breakers |
15A |
||
|
UPS Input Cord Length (ft.) |
10 |
||
|
UPS Input Cord Length (m) |
3.1 |
||
|
Recommended Electrical Service |
15A 120V |
||
|
Input Phase |
Single-Phase |
Output:
|
Output Volt Amp Capacity (VA) |
1000 |
||
|
Output Capacity (kVA) |
1 |
||
|
Output Watt Capacity (Watts) |
900 |
||
|
Output kW Capacity (kW) |
0.9 |
||
|
Output Capacity Details |
ON LINE MODE: Maximum output capacity is reduced to 608 watts at 100V nominal; FREQUENCY / REGULATION CONVERSION MODE: Maximum output ratings are reduced in frequency regulation / conversion mode (127/120/115/110V 630 watts / 100V 567 watts). OVERLOAD CAPACITY: Supports inverter operation up to 105% load continuously, 125% load for 3 minutes; 150% load for 30 seconds and >150% load for 0.5 seconds before switching to BYPASS (when bypass input voltage and frequency are WITHIN bypass limits) or SHUTDOWN (when bypass input voltage or frequency are OUTSIDE bypass limits) |
||
|
Power Factor |
0.9 |
||
|
Crest Factor |
3:1 |
||
|
Nominal Voltage Details |
120V factory-default nominal voltage |
||
|
Frequency Compatibility |
50 / 60 Hz; Supports 50 to 60 Hz and 60 to 50 Hz conversion |
||
|
Frequency Compatibility Details |
ON LINE MODE: Output frequency is automatically configured to match nominal input frequency on startup; Output matches input frequency when +/-5Hz of nominal; Output is regulated to +/-0.05Hz when input frequency exceeds +/-5Hz of nominal. UPS switches to battery mode when input frequency is below 40Hz or above 70Hz. FREQUENCY REGULATION / CONVERSION MODE: Output is regulated to +/-0.05Hz of selected output frequency input is 40 to 70Hz; UPS switches to battery mode when input frequency is below 40Hz or above 70Hz. BATTERY MODE: Output is regulated to +/-0.05Hz. |
||
|
Output Voltage Regulation (Line Mode) |
+/- 2% |
||
|
Output Voltage Regulation (Economy Line Mode) |
+/- 10% |
||
|
Output Voltage Regulation (Battery Mode) |
+/- 3% |
||
|
Load Management Receptacles |
Two switchable single-outlet 5-15R load banks |
||
|
Output AC Waveform (AC Mode) |
Pure Sine wave |
||
|
Output AC Waveform (Battery Mode) |
Pure Sine wave |
||
|
Nominal Output Voltage(s) Supported |
100V; 110V; 115V; 120V; 127V |
||
|
Output Receptacles |
|
||
|
Individually Controllable Load Banks |
Yes |
Battery:
|
Battery Type |
Valve Regulated Lead Acid (VRLA) |
|
Full Load Runtime (min.) |
4.8 min. (900w) |
|
Half Load Runtime (min.) |
14 min. (450w) |
|
Expandable Battery Runtime |
Extended runtime supported via optional external battery packs |
|
Expandable Runtime |
Yes |
|
Expandable Runtime Description |
Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software, see manual for details |
|
External Battery Pack Compatibility |
BP24V15RT2U (limit 1); BP24V28-2U (limit 1); BP24V70-3U (multi-pack compatible); BP24V36- 2US (multi-pack compatible) |
|
DC System Voltage (VDC) |
24 |
|
Battery Recharge Rate (Included Batteries) |
Less than 3 hours recharge to 90% (typical, full load discharge) |
|
Battery Access |
Front panel battery access |
|
Internal UPS Replacement Battery Cartridge |
RBC24V-LCD |
|
Battery Replacement Description |
Hot-swappable, user replaceable batteries |
Voltage Regulation:
|
Voltage Regulation Description |
Online, double-conversion power conditioning maintains 2% output voltage regulation during brownouts and overvoltages |
|
Overvoltage Correction |
Corrects overvoltages to 150V (0-100% load) |
|
Undervoltage Correction |
Corrects undervoltages to 100V at full load (90V at 100V nominal) |
|
Severe Undervoltage Correction |
Corrects brownouts to 70V (70% load) & 55V (33% load) |
User Interface, Alerts & Controls:
|
Front Panel LCD Display |
Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, frequency, operating mode, alarm function and a variety of additional options |
|
Switches |
2 switches control off/on power status and alarm-cancel operation; 2 additional scroll-down and scroll-up / select options enable LCD status viewing and configuration options |
|
Alarm Cancel Operation |
Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available |
|
Audible Alarm |
Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions |
|
LED Indicators |
7 front panel LEDs indicate line power availability, AC to DC conversion, battery mode operation, inverter mode, eco mode operation, bypass mode operation and AC output status |
Surge / Noise Suppression:
|
UPS AC Suppression Joule Rating |
570 |
|
UPS AC Suppression Response Time |
Instantaneous |
|
UPS Dataline Suppression |
1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet |
|
EMI / RFI AC Noise Suppression |
Yes |
Physical:
|
Primary Form Factor |
Rackmount
|
|
Cooling Method |
Fan
|
|
Included Mounting Accessory Description |
Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm)
|
|
Installation Form Factors Supported with Included Accessories |
4 post 19 inch rackmount
|
|
Installation Form Factors Supported with Optional Accessories |
2 post rackmount ( 2POSTRMKITWM ); 2-4 post front rail rackmount ( UPSHDEARKIT ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2- 9USTAND ); Wallmount ( 2POSTRMKITWM )
|
|
Minimum Required Rack Depth (cm) |
15.5
|
|
Minimum Required Rack Depth (inches) |
30
|
|
Optional Mounting Accessory Notes |
Optional 2-9USTAND enables upright tower UPS placement; 2POSTRMKITWM enables wall-mount and 2-post rackmount installation; 4POSTRAILKITWM enables installation in 4-post short-depth racks from 14.5 to 23.5 inches (368 to 597mm); UPSHDEARKIT enables installation in 2 or 4-post racks using front vertical rails only, without rear support
|
|
Primary UPS Depth (mm) |
318
|
|
Primary UPS Height (mm) |
89 |
|
Primary UPS Width (mm) |
445 |
|
Rack Height |
2U |
|
Shipping Dimensions (hwd / cm) |
23.37 x 59.18 x 49.02 |
|
Shipping Dimensions (hwd / in.) |
9.20 x 23.30 x 19.30 |
|
Shipping Weight (kg) |
19.28 |
|
Shipping Weight (lbs.) |
42.50 |
|
UPS Housing Material |
Steel |
|
UPS Power Module Dimensions (hwd, cm) |
8.89 x 44.45 x 31.75 |
|
UPS Power Module Dimensions (hwd, in.) |
3.5 x 17.5 x 12.5 |
|
UPS Power Module Weight (kg) |
13.15 |
|
UPS Power Module Weight (lbs.) |
29 |
Environmental:
|
Operating Temperature Range |
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
|
|
Storage Temperature Range |
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius |
|
Relative Humidity |
0 to 95%, non-condensing |
|
AC Mode BTU / Hr. (Full Load) |
341 |
|
AC Economy Mode BTU / Hr. (Full Load) |
231 |
|
Battery Mode BTU / Hr. (Full Load) |
585 |
|
AC Economy Mode Efficiency Rating (100% Load) |
93% |
|
Audible Noise |
45 dBA at 1m front side |
|
Operating Elevation (m) |
Up to 3000m |
Communications:
|
Network Management Cards |
SNMPWEBCARD ; TLNETCARD ; WEBCARDLX ; MODBUSCARD ; RELAYIOCARD |
|
Network Monitoring Port Description |
Supports detailed monitoring of UPS and site power conditions; DB9 port supports RS232 and contact closure communications |
|
PowerAlert Software |
For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at https://www.tripplite.com/poweralert |
|
Communications Cable |
USB and DB9 cabling included |
|
WatchDog Compatibility |
Supports Watchdog application, OS and hard-reboot restart options for remote applications |
|
Network Management Card Description |
Network management card optional |
|
Communications Interface |
Contact closure; DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface; USB (HID enabled) |